What Is the Primary Goal of Mold Remediation?

Mold remediation is a process that cleans and decontaminates mold-contaminated environments. Simply put, mold removal will remove the mold and spores from your home or property. It’s essential first to identify that decay has caused damage before starting a remediation project, however. You will need to hire a professional for this part of the process, as most amateur methods only worsen the problem by spreading it around! There are two main options for remediating an area: physically removing the mold from the property and cleaning everything else or using antimicrobial chemicals Environmental Consultant Company For Mold Removal, Decontamination, And Sanitization.

What Type of Mold Requires Professional Remediation?

Only professional mold removal companies should handle larger jobs unless you have extensive prior knowledge in DIY mold remediation. These are usually remedial treatments in homes built on stilts where seepage has occurred between its base and adjacent ground. It can be difficult to spot all affected areas, so being extra thorough is also recommended for these types of mold jobs. You will need to be careful when it comes to choosing a contractor for this. Remember that most are qualified in one specific area only, so ensure they have the requisite knowledge you’re looking for. This means being clear about how they plan on removing the mold and if they’ll be using protective gear! A professional remediator will always follow health & safety protocols, so you can rest assured of their abilities in these departments.

What Happens During Mold Removal?

The removal process is broken down into three phases: containment, cleaning, and restoration/remediation, which we explain below: Containment – The first step of any DIY or professional job should be identifying and isolating the affected areas with “do not cross” tape and plastic sheeting, so you don’t cause contamination further afield. It’s also vital that you prevent the spread of contaminated air through your home or office by keeping doors and windows shut. You can then remove the surface mold using water misting, sponges, brushes, etc., but be sure to wear protective clothing to avoid spreading it yourself.

Cleaning – Next up is cleaning the moldy material itself before disposing of it properly. A professional remediator will often use antimicrobial chemicals Environmental Consultant Company For Mold Removal, Decontamination, And Sanitization during this phase which are usually kept in tanks outside the property. These chemicals are injected into affected areas for between 24 and 48 hours, depending on the job size, before being extracted via a vacuum.